With worldwide headquarters located in England/UK, FuelSave Shanghai Rep. Office | FuelSave (Shanghai) Energy-Saving Technolog Co., Ltd. is a subsidiary of FuelSave UK, a leading manufacturer of unique High Emissivity energy saving refractory treatments and coatings which have been developed for use in high temperature industrial thermal processing vessels, kilns and furnaces. FuelSave products are formulated from a proprietary blend of organic metallic oxide compounds suspended in unique carrier mechanisms and through these technically advanced compositions, which provide the end users of FuelSave with unparalleled reductions in energy consumption, emissions and other process related costs.

FuelSave will not spall or peel from any refractory or insulation substrate........ "FuelSave is the only way.... to achieve long term effective solution for both energy and emission reducing initiatives.

FuelSave is supplied as a multi-pack system that is mixed on site and spray applied by our skilled installation engineers. The aqueous consistency of FuelSave penetrates refractory surface porosity to form an impervious protective film which generates exceptional non-stick characteristics while substantially improving the refractories resistance to chemical attack from volatile organic compounds and other process contaminants. Read More

The proprietary and “UNIQUE” nano-organic-metallic oxide formulation has an aqueous consistency that permeates porosity in the refractory substrate to provide an impervious non-stick membrane to provide optimum long-term emissivity. By preventing the sticking of dust ash and oxides present in the processing atmosphere, FuelSave resists chemical attack from contaminants or volatiles found in fossil fuels or volatilised feed stock oxides, thus protecting refractories and enhancing longevity.
With a final installed thickness equalling approximately 30-40 microns, weight of the sintered coating amounts to a mere 250g/m2, rendering FuelSave as equally effective on low mass, low strength fibrous insulation linings as it is on dense refractory brick or monolithic.

Essentially FuelSave is NOT A CERAMIC based coating and therefore the perennial problems of coating, spalling or separation through differentials in thermal expansion are resolved...GUARANTEED.

Close